HP Color LaserJet Enterprise CP5525 Printer series - Manual (Page 63)

Mac OS X 10.4 1. From the Apple menu , click the System Preferences menu and then
click the Print & Fax icon.
2. Click the Printer Setup button.
3. Click the Installable Options menu.
Mac OS X 10.5 and 10.6 1. From the Apple menu , click the System Preferences menu and then
click the Print & Fax icon.
2. Select the product in the left side of the window.
3. Click the Options & Supplies button.
4. Click the Driver tab.
5. Configure the installed options.
NOTE: For Mac OS X 10.5 and 10.6, the installation procedure should
automatically configure the installed options.
6. Print a page from any program to make sure that the software is correctly installed.
NOTE: If the installation failed, reinstall the software.
Install software for Mac computers on a wired network
Configure the IP address
1. Connect the network cable to the product and to the network.
2. Wait for 60 seconds before continuing. During this time, the network recognizes the product and
assigns an IP address or host name for the product.
3. At the product control panel, press the Home button .
4. Press the down arrow to highlight the Administration menu, and then press the OK button.
5. Press the down arrow to highlight the Reports menu, and then press the OK button.
6. Press the down arrow to highlight the Configuration/Status Pages menu, and then press
the OK button.
7. Press the down arrow to highlight the Configuration Page menu, and then press the OK
button.
ENWW Software for Mac 47