HP Color LaserJet Enterprise CP5525 Printer series - Manual (Page 124)

Table 7-1 Supplies status messages (continued)
Control panel message Description Recommended action
Magenta cartridge low The print cartridge is nearing the estimated
end of its useful life. The product indicates when the print
cartridge level is low. The actual print
cartridge life remaining can vary. Consider
having a replacement cartridge available to
install when the print quality is no longer
acceptable. The print cartridge does not
need to be replaced now.
Magenta cartridge very low The print cartridge is at the estimated end of
its useful life.
Print quality might decrease. Replace the
print cartridge when the print quality
becomes unacceptable.
To ensure optimal print quality, HP
recommends replacing the print cartridge at
this point. You do not need to replace the
print cartridge at this time unless the print
quality is no longer acceptable. The actual
print cartridge life can vary.
Once an HP print cartridge has reached the
very low threshold, the HP Premium
Protection Warranty on that print cartridge
has ended. All print defects or print cartridge
failures incurred when an HP print cartridge
is used in “continue in very low” mode will
not be considered to be defects in materials
or workmanship in the print cartridge under
the HP Print Cartridge Warranty Statement.
Replace <color> cartridge This alert appears only if the product is
configured to stop when the print cartridge
reaches the very low threshold. The product
indicates when a supply level is at its
estimated end of life. The actual life
remaining might be different than the
estimation. Have a replacement supply
available to install when print quality is no
longer acceptable. The supply does not need
to be replaced now unless the print quality is
no longer acceptable. After an HP supply
has reached its approximated end of life, the
HP Premium Protection Warranty on that
supply ends. Replace the specified color cartridge.
Or, configure the product to continue
printing by using the Manage Supplies
menu.
Replace fuser kit The product indicates when the fuser kit is at
its estimated end of life. The actual life
remaining might be different than the
estimation. Have a replacement fuser kit
available to install when print quality is no
longer acceptable. The fuser kit does not
need to be replaced now unless the print
quality is no longer acceptable. After the
fuser kit reaches its approximated end of life,
the HP Premium Protection Warranty on that
fuser kit ends. WARNING! The fuser can be hot while
the product is in use. Wait for the fuser to
cool before handling it.
Replace the fuser kit. Instructions are
included with the fuser kit.
108 Chapter 7 Manage supplies ENWW