HP NC550SFP Dual Port 10GbE Server Adapter - Manual (Page 12)

Configuring and managing the iSCSI Initiator 12
The DHCP IP Address displays the IP address settings.
4. Press Enter to select OK and Esc to return to the Network Configuration menu.
Configuring a Static IP Address
If there is no DHCP server available, you must statically configure an IP address by completing these
steps:
1. From the Network Configuration menu, tab to Configure Static IP Address and press Enter.
If you have a DHCP Enabled, a warning displays that the DHCP IP Address will be lost. Press Y to
continue.
2. From the Static IP Address menu, enter the IP Address.
3. Enter the Subnet Mask.