HP NC550SFP Dual Port 10GbE Server Adapter User Manual
Page 24
Configuring and managing iSCSI targets 24
1.
From the Controller Configuration menu, select iSCSI Target Configuration, then select Add New
iSCSI Target.
2.
Follow steps 2 -8 in "Configuring an ISCSI target (on page
)."
3.
From the Add/Ping iSCSI Target menu, tab to Authentication Method, and select One-Way Chap
and press Enter.
4.
Tab to enter the Target CHAP Name and Target Secret, and press OK.
The Target CHAP Name and Target Secret can be any name or sequence of numbers over 12
characters but less than 16 characters.
When you have successfully enabled the CHAP authentication, the Add/Ping iSCSI Target menu displays.
Mutual CHAP
With Mutual CHAP authentication, the target authenticates the initiator and the initiator authenticates the
target for a two-way challenge/response security method.
1.
From the Controller Configuration menu, select iSCSI Target Configuration, and select Add New iSCSI
Target.
2.
Follow steps 2-8 in "Configuring an iSCSI target (on page
)."
3.
From the Add/Ping iSCSI Target menu, tab to Authentication Method, select Mutual Chap, and press
Enter.
4.
Tab to enter the Target CHAP Name, Target Secret, Initiator CHAP Name, Initiator Secret, and then
press OK.