HP NC550SFP Dual Port 10GbE Server Adapter - Manual (Page 25)

Configuring and managing iSCSI targets 25
The Target/Initiator CHAP Name and Target/Initiator Secret can be any name or sequence of
numbers over 12 characters but less than 16 characters. However, the name and secret on the
Target side must match the name and secret on the Initiator side.
After you have successfully enabled the CHAP authentication, the Add/Ping iSCSI Target menu displays.
Pinging a target
Before you add a target, you may want to verify that you can connect to the target. You can do this by
using the Ping option through HP NC-Series Server Engines iSCSISelect.
1. From the Add/Ping iSCSI Target menu, tab to Ping and press Enter.
If you want to verify that you can connect to the target before you login, you must ping the target
before you Save/Login your configuration on the Add/Ping iSCSI Target menu.