HP NC550SFP Dual Port 10GbE Server Adapter - Manual (Page 22)

Configuring and managing iSCSI targets 22
The following is an example of a target detail menu.
Editing a target configuration
After you have added a target, you can edit your iSCSI target configuration or apply other management
options to your target.
1. From the iSCSI Target Configuration menu select a target and press Enter. The Edit/Ping iSCSI
Target menu displays for the target you selected. From this menu you can view the properties for any
target you have added and you can edit any of the properties displayed in the blue font.
2. To enable the target as a boot target, tab to Boot Target and press Yes.
3. If the ISID Qualifier has not been previously set, you can set it on this menu by tabbing to ISID
Qualifier and typing a number value.