HP NC550SFP Dual Port 10GbE Server Adapter User Manual
Page 20
Configuring and managing iSCSI targets 20
After you have added your targets, the iSCSI Target Configuration menu displays and you can view
your newly added Target information.
14.
If you set the Boot Target option (in an earlier step) before adding the target, Boot Target registers
No on this menu. To enable Boot Target or make other changes to your target or targets, select the
target and press Enter. The Edit/Ping iSCSI Target menu displays and from this menu, you can edit
the target.
Using manual configuration to add an iSCSI target
1.
From the Controller Configuration menu, select iSCSI Target Configuration, and then select Add New
iSCSI Target.
2.
From the Add/Ping iSCSI Target menu, enter the iSCSI Target Name.
3.
Enter the iSCSI Target IP Address.