HP StorageWorks XP Remote Web Console Software - Manual (Page 43)

Pools in the storage system are displayed in the tree. The following icons are displayed.
•
: storage system.
• Pool:X : pool in normal status (X indicates pool ID)
Pool:X : pool whose usage rate exceeds the threshold (X indicates pool ID)
•
•
Pool:X : blocked pool (X indicates pool ID)
• Pool/volume list (the area in the upper right of the window)
If you select Subsystem in the tree, the pool/volume list displays the list of the pools in the
storage system. When you select Subsystem in the tree, the following items will be displayed in
the pool/volume list.
• Pool ID: pool ID
• Capacity(GB): storage capacity of the pool
• Used Capacity(GB): capacity of the pool that is used by the XP Snapshot pairs
• Usage rate: usage rate of the pool
• Pool-VOL(s): total number of the pool-VOLs in the pool
• Snapshot pair(s): total number of snapshot data stored in the pool
If you select a pool icon in the tree, the pool/volume list displays the list of the XP Snapshot pairs
in the pool. When you select a pool icon in the tree, the following items will be displayed in
the pool/volume list.
• P-VOL: port ID, the group number of the host group, and LUN (LDKC number, CU number, and
LDEV number of the volume) of the P-VOL
• MU: snapshot ID
• Status: status of the XP Snapshot pair
• S-VOL: port ID, the group number of the host group, and LUN (LDKC number, CU number, and
LDEV number of the volume) of the S-VOL
Note: When the volume is unmounted, --- is displayed.
• Pool used(GB): capacity of the pool that is used by the S-VOL
• Sync.: consistency rate of the data of the P-VOL and the S-VOL
• Pool Association Inf.: X GB / Y GB
X indicates the capacity of the pool association information in use.
Y indicates the total capacity of the pool association information, including the capacity of the
pool association information in use.
• Pool Mng. Block: X GB / Y GB
X indicates the capacity of the pool management blocks in use.
Y indicates the total capacity of the pool management blocks, including the capacity of the pool
management blocks in use.
Note: Pool association information and a pool management block are the elements of the V-VOL
management area. You need to know the capacity of these two elements to calculate the number of XP
Snapshot pairs you can create. For information about how to calculate the number of XP Snapshot pairs
you can create, see “ Calculating Maximum Number of Pairs ” on page 27.
• Pop-up menu (pool/volume list)
When you select a pool icon in the tree, and then select and right-click the XP Snapshot pairs in
the pool/volume list, a pop-up menu Pairsplit-S will be displayed. If you select this pop-up menu,
the Pairsplit-S dialog box ( Figure 19 on page 66) will be displayed.
• Preview list
Displays the content of the operations that have been set or specified in the XP Snapshot window,
but are still not applied to the Storage system. To apply the operations displayed in the Preview
list to the Storage system, click Apply.
The Preview list displays the following items.
• P-VOL: port ID, the group number of the host group, and LUN of the P-VOL
• MU: snapshot ID
• S-VOL: port ID, the group number of the host group, and LUN of the S-VOL
• Error Code: code that indicates the cause of the error
XP24000 Snapshot User's Guide 43