HP StorageWorks XP Remote Web Console Software - Manual (Page 77)

Note: If you complete a SIM, the status of the SIM changes to completed. After the problem that caused
the SIM is solved, complete the SIM and change its status to completed.
1. Change the status of the pool whose usage rate exceeds the threshold to normal, and restore the
blocked pool to change its status to normal.
For information about the solutions when the pool usage rate exceeds the threshold and the pool
becomes blocked, see Table 24 on page 73.
2. Change the mode of the Remote Web Console to Modify.
If the mode is already changed to Modify, you can skip this step. For information about how to
change the mode, see the HP StorageWorks XP24000 Remote Web Console User’s Guide.
3. Display the Pool window.
4. Select the SIM Complete Request check box.
5. Click Apply.
The confirmation message is displayed asking if it is OK to apply the setting to the storage system.
6. Click OK.
The confirmation message closes and the SIM complete process begins. It takes time if there
are many SIMs to be completed.
You can check whether the SIMs are completed successfully in the window of Remote Web Console. For
details, see the HP StorageWorks XP24000 Remote Web Console User’s Guide.
XP24000 Snapshot User's Guide 77