HP StorageWorks XP Remote Web Console Software - Manual (Page 68)

Note : If you select the Detail command in the pop-up menu when you are selecting a Business Copy pair,
the displayed Detail dialog box will be different from that displayed when you select an XP Snapshot
pair. For details, see the HP StorageWorks XP24000 Business Copy Software User’s Guide.
Figure 20 Detail Dialog Box for an XP Snapshot Pair
The Detail dialog box displays the following items.
• P-VOL
LDKC number, CU number, and LDEV number of the P-VOL is displayed.
• Emulation
Emulation type of the P-VOL is displayed.
• Capacity(MB)
Capacity of the P-VOL is displayed. The unit is megabytes (MB).
• Capacity(blocks)
The number of blocks used by the P-VOL is displayed.
• CLPR(P)
The cache logical partition (CLPR) of the P-VOL is displayed.
• Pool ID
Pool ID of the pool in which the P-VOL is registered is displayed.
• Amount of pool use by P-VOL(GB)
Amount of the pool capacity that is used by the P-VOL is displayed.
• Pool usage rate by P-VOL
Pool usage rate of the P-VOL is displayed.
• Snapshot Pair Detail list
The following information items of snapshot data are displayed.
• MU: snapshot ID
• S-VOL: LDKC number, CU number, and LDEV number of the S-VOL
• Status: status of the XP Snapshot pair
• Date: time when the snapshot data is stored in the pool
• Pool used(GB): capacity of the pool that is used by the S-VOL
• Sync.: consistency rate of the data of the P-VOL and the S-VOL
• CLPR(S): cache logical partition (CLPR) of the S-VOL
• Refresh the window after this dialog box is closed. check box
If you select the check box, the information displayed in Business Copy’s Pair Operation window
will be updated after the Detail dialog box closes. If you do not select the check box, the
information in the Pair Operation window will be the same before and after you close the Detail
dialog box.
68 Performing XP Snapshot Operations