HP StorageWorks XP Remote Web Console Software - Manual (Page 63)

• Even when you use the multiple CUs, LDEV numbers will be assigned according to the setting
in the Interval drop-down list.
• Select LDEV No. area
Among the CUs which belong to the LDKC you selected from the Select LDKC No. drop-down
list, the settings of LDEV numbers for the CU number selected from the Select CU No. drop-down
list are displayed. Numbers in the upper end and the left side indicate the LDEV number. For
example, the LDEV number of the cell whose upper end is +2 and left side is +10 is 12.
Gray cells indicate the LDEV numbers that are already used for other volumes, white cells indicate
the unused LDEV numbers, and blue cells indicate the LDEV numbers that are selected for the
V-VOLs in this dialog box.
• CU number of another SLPR is used. check box
Allows you to select the CU numbers of the SLPR other than the SLPR now you are in.
• Back button
Returns to the Create V-VOL wizard dialog box (1) while maintaining the settings in this dialog box.
• Next button
Fixes the setting in this dialog box and moves to the Create V-VOL wizard dialog box (3).
• Cancel button
Cancels the setting in the Create V-VOL wizard dialog box (2) and closes the dialog box.
Figure 18 Create V-VOL Wizard Dialog Box (3)
The Create V-VOL wizard dialog box (3) displays the following items.
• V-VOL Group drop-down list
You can select the V-VOL group number of the V-VOL you set. Note that you cannot enter the
number.
• V-VOL information setting list (middle of the dialog box)
XP24000 Snapshot User's Guide 63