HP StorageWorks XP Remote Web Console Software - Manual (Page 66)

The list of the pairs or volumes is displayed in the volume list.
4. Select and right-click the XP Snapshot pairs you want to delete.
A pop-up menu is displayed.
Note: You cannot delete a Business Copy pair and an XP Snapshot pair at the same time.
5. Select the Pairsplit-S command from the pop-up menu.
The Pairsplit-S dialog box ( Figure 19 on page 66) is displayed.
6. Click OK.
The Pairsplit-S dialog box closes and a list of the XP Snapshot pairs that you are going to delete
is displayed in the Preview list of the Pair Operation window.
7. Click Apply.
A confirmation message is displayed asking if it is OK to apply the setting to the storage system.
8. Click OK.
The confirmation message closes and the deletion of the pair is applied to the subsystem.
Figure 19 Pairsplit-S Dialog Box
When you select an XP Snapshot pair and display the Pairsplit-S dialog box, the dialog box displays the
following items.
• Volume list
Information about the XP Snapshot pairs you are going to delete is displayed.
• P-VOL: Information about the P-VOL is displayed in AAA-BB-CCC(XX:YY:ZZ) format.
• AAA: The port ID (cluster and channel number)
• BB: The group number of the host group
• CCC:
LU number
• XX:YY:ZZ: LDKC number:CU number:LDEV number
Note: An LDEV number that ends with a # indicates that the LDEV is an external volume
(for example, 00:00:01#). An LDEV number that ends with the letter X indicates that the
LDEV is a virtual volume used by XP Thin Provisioning (for example, 00:00:00X). For details
regarding external volumes, see the HP StorageWorks XP24000 External Storage Software
User’s Guide. For information about XP Thin Provisioning, see the HP StorageWorks XP24000
Thin Provisioning Software User’s Guide.
• MU: snapshot ID
• Status: status of the XP Snapshot pair
• S-VOL: Information about the S-VOL is displayed in AAA-BB-CCC(XX:YY:ZZ) format.
• AAA: The port ID (cluster and channel number)
66 Performing XP Snapshot Operations