HP Storage Mirroring Software - Manual (Page 356)

354 of 739
●
No Bandwidth Limit—Data will be transmitted using all available
bandwidth.
●
Fixed Bandwidth Limit—Data will be transmitted according to the
user-specified bandwidth configuration. By default, the Unlimited
checkbox is enabled. This configuration is identical to selecting No
Bandwidth Limit. If you want to limit your bandwidth usage, clear this
checkbox. To limit the bandwidth usage, enter the maximum amount of
data you want to transfer per second. You can indicate it by specifying
your Connection Speed and the Percentage of the bandwidth that
you want to use or by entering the Transfer Rate value directly.
h. Select the Orphans tab and specify your Storage Mirroring Recover orphan
file parameters. By default, the orphan files feature is disabled. To enable it,
select Move/Delete Orphan Files. Specify if you want to delete or move the
files. If you select the move option, identify the location where these orphan
files will be located.