HP Storage Mirroring Software - Manual (Page 72)

70 of 739
DOUBLETAKEFOLDER="C:\Program Files\HP\Storage Mirroring"
QMEMORYBUFFERMAX=128
DISKQUEUEFOLDER="C:\Program Files\HP\Storage Mirroring"
DISKQUEUEMAXSIZE=UNLIMITED
DISKFREESPACEMIN=50
DTSERVICESTARTUP=1
PORT=6320
SET_FWPORT=Y
In the sample DTSetup file, the server Alpha would use the parameters defined under
the [Alpha] heading. The server Beta would use the parameters defined under the [Beta]
heading. All other servers would use the configuration under the [Config] section.
Note:
Do not leave any parameter blank in the Config or MachineName sections.
Otherwise, a hard-coded default stored in a Storage Mirroring Recover .dll file
will be used.
Review the following table to understand the different parameters available in
DTSetup.ini.
Parameter Valid Values
DTSetupType
●
DTNT—Both the Storage Mirroring Recover server and
client components will be installed.
●
DTCO—Only the Storage Mirroring Recover client
components will be installed.
●
DTSO—Only the Storage Mirroring Recover server
components will be installed.
DTActivationCode
A 24 character, alpha-numeric activation code which applies the
appropriate license to the server. Multiple activation codes can be
separated by a semi-colon.
DoubleTakeFolder
Any valid path specifying the location of the Storage Mirroring
Recover files
QMemoryBufferMax
Any integer representing the amount of system memory, in MB, to
use for memory-based queuing
DiskQueueFolder Any valid path to the location of the disk-based queue.
DiskQueueMaxSize
Any integer representing the amount of disk space, in MB, to use
for disk-based queuing or the keyword UNLIMITED which will
allow the queue usage to automatically expand whenever the