Use hp direct print (wireless models only) – HP LASERJET PRO P1102w User Manual
Page 65
c.
Click the HP Web Services tab. If your network does not use a proxy server to access the
Internet, proceed to the next step. If your network uses a proxy server to access the Internet,
follow these instructions before proceeding to the next step:
i.
Select the Proxy Settings tab.
ii. Select the Check this box if your network uses a proxy server to access
the Internet check box.
iii. In the Proxy Server field, enter the proxy server address and port number, and then
click the Apply button.
d. Select the HP Web Services tab and click the Enable button. The product configures the
connection to the Internet, and then a message appears informing you that an information
sheet will be printed.
e. Click the OK button. An ePrint page prints out. On the ePrint page, look for the e-mail
address that is automatically assigned to the product.
2.
To print a document, attach it to an e-mail message, and then send the message to the product's e-
mail address. Go to
for a list of supported document types
3.
Optionally, use the HP ePrintCenter Web site to define security settings and to configure default
print settings for all HP ePrint jobs sent to this product:
a. Open a Web browser and go to
.
b. Click Sign In, and enter your HP ePrintCenter credentials or sign up for a new account.
c.
Select your product from the list, or click the + Add printer button to add it. To add the
product, you need the product code, which is the segment of the product e-mail address that
is before the @ symbol.
NOTE:
This code is valid for only 24 hours from the time you enable HP Web Services. If it
expires, follow the instructions to enable HP Web Services again, and obtain a new code.
d. Click the Setup button. The HP ePrint Settings dialog box appears. Three tabs are
available:
●
Allowed Senders. To prevent your product from printing unexpected documents, click
the Allowed Senders tab. Click Allowed Senders Only, and then add the e-mail
addresses from which you want to allow ePrint jobs.
●
Print Options. To set up default settings for all ePrint jobs sent to this product, click the
Print Options tab, and then select the settings that you want to use.
●
Advanced. To change the product’s e-mail address, click the Advanced tab.
Use HP Direct Print (wireless models only)
Use HP Direct Print to print directly to the product from any mobile device (such as a smart phone, net
book, or laptop computer).
ENWW
Print with Windows
51