HP Color LaserJet 2550 Printer series - Manual (Page 35)

Ready light
The Ready light is on when the printer is ready to print (experiencing no errors that prevent
printing) and blinks when it is receiving data to be printed.
Go light and Go button
●
When the Go light is on and the Attention light is blinking, pressing ( G
O
) continues
the print job after you load print media for a manual feed, or clears some errors.
● When the Go light is blinking, the top cover has been opened and then closed or you
have pressed ( R
OTATE
C
AROUSEL
). Pressing ( G
O
) returns the printer to the Ready
state. If you do not press ( G
O
), the printer returns to the Ready state on its own.
●
When the Go light is off, pressing ( G
O
) prints a Demo page. Pressing ( G
O
) and
( C
ANCEL
J
OB
) simultaneously prints a Configuration page and a Supplies Status page.
(If an HP Jetdirect print server is installed, an HP Jetdirect page also prints.)
ENWW Control panel features 25