HP StorageWorks ESL9000 Tape Library - Manual (Page 71)

Operating the Control Panel
71 HP StorageWorks ESL9000 Series Tape Library User Guide
Changing Security Levels
To change security levels:
1. Press the Lock icon. The Password screen is displayed (see Figure 27 ).
Figure 27: Change password screen
2. Press the Security Level button for the desired level of security (Operator,
Service, User, Import Only, or Locked).
3. Enter a password if necessary. A password is required to enter a higher
security level than the current level.
4. Press the Enter button. A new screen verifies that the new security level has
been set successfully.
5. Press OK. The lock icon displays the new security level (O, S, U, I, or L).