HP StorageWorks ESL9000 Tape Library - Manual (Page 77)

Operator Commands
77 HP StorageWorks ESL9000 Series Tape Library User Guide
2. Press the Configure button. The control panel displays the Configure:
Library Settings screen (see Figure 31 ). Make sure that the library is off-line.
Figure 31: Configure: library settings screen (ESL9595 shown)
3. Press the Select button until you highlight the setting you want to change.
4. Using the arrow buttons, scroll through the available values for the setting.
5. Press the Change button to accept the new value.
6. Repeat step 3 through step 5 to make other changes.
7. Press the Back button to return to the Configure: Library screen.
The options you selected are now part of the library configuration.
Note: Not all model numbers are available from the GUI. If you are unable to find a
particular model number, refer to the configuration menu in the ESL LibDiag serial
diagnostics tool, which must be used to set the model number. Access LibDiag from
http://www.hp.com/support .