HP Designjet L25500 Printer series - Manual (Page 21)

3. Remove the first end of the spindle from the right side of the printer, and then move the spindle to
the right in order to extract the other end. Do not insert your fingers into the spindle supports during
the removal process.
The spindle has a stop at each end to keep the roll in position. Remove the blue stop at the left
end to mount a new roll (the stop at the other end can also be removed, if you wish). The stop
slides along the spindle to hold rolls of different widths.
4. Slide the lever-lock on the blue stop to the unlocked position.
5. Remove the stop from the left end of the spindle.
ENWW Load a roll onto the spindle 17
Hand
le the su
bstrate