HP Designjet L25500 Printer series - Manual (Page 40)

10. Remove the roll from the printer, pulling out the end on the right side of the printer first. Do not
insert your fingers into the spindle supports during the removal process.
11. To remove the roll from the printer after you have unloaded the take-up reel, see Unload a roll from
the printer on page 25 .
Loading textile types of media
The following steps show you how to load a textile type of media into the printer by using a secondary
section of media as backing.
1. Select a piece of paper of a similar width of the paper and around 500 mm length, polyester
materials (Backlits) are the best ones for wider medias due to it stiffness
36 Chapter 4 Handle the substrate ENWW
Handle the su
bstrate