HP Designjet L25500 Printer series - Manual (Page 8)

Label Explanation
Electric shock hazard. The printer has two input power cords.
A voltage is still present in the drying and curing modules after
the main switch is turned off. There are no operator-
serviceable parts inside the printer. Refer servicing to qualified
service personnel. Disconnect all power cords before
servicing.
See installation instructions before connecting to the supply.
Ensure that the input voltage is within the printer's rated voltage
range. The printer requires two dedicated lines, each protected
by a branch circuit breaker according to the rating of the wall
socket outlet. Use only earthed mains outlets and the power
cords supplied by HP with the printer.
Risk of trapped hands. Do not push the roll while loading. Lift
the loading table to ease the spindle into the printer.
Risk of trapped fingers. Do not touch spindle gears while
moving.
Do not put objects on top of the printer. Do not cover the fans.
You are recommended to wear gloves when handling ink
cartridges, printhead cleaning cartridges and the printhead
cleaning container.
The printer's main features
Your printer is a color inkjet printer designed for printing high-quality images on flexible substrates from
23 in (584 mm) to 42 or 60 in (1.07 or 1.52 m) wide, depending on which printer model you have. Some
major features of the printer are shown below:
● Printing speeds in draft mode of up to 250 ft²/h (24 m²/h) with the 60-in printer, 220 ft²/h (21 m²/h)
with the 42-in printer.
● Environmentally friendly, odorless, aqueous latex inks in six colors
● No special ventilation required, no hazardous waste
● 775 ml ink cartridges
4 Chapter 1 Introduction ENWW
Introduction