HP ProLiant BL680c G7 Server-Blade - Manual (Page 105)

Troubleshooting 105
Possible causes:
• Corrupted OS
• Hard drive subsystem problem
• Incorrect boot order setting in RBSU
Item See
1 HP ROM-Based Setup Utility User Guide
( http://www.hp.com/servers/smartstart )
2 "POST problems flowchart (on page 102 )"
3 • "Hard drive problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or see "Troubleshooting
resources (on page
92 )"
• Controller documentation
4 "HP Insight Diagnostics (on page 88 )" or in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or see
"Troubleshooting resources (on page
92 )"
5 • "Loose connections (on page 96 )"
• "CD-ROM and DVD drive problems" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or see
"Troubleshooting resources (on page
92 )"
• Controller documentation
6
"General memory problems are occurring" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or see
"Troubleshooting resources (on page
92 )"
7 • "Operating system problems" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or see
"Troubleshooting resources (on page
92 )"
• "HP contact information (on page 120 )"
8 • "Hardware problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or see "Troubleshooting
resources (on page
92 )"
• Maintenance and service guides for p-Class server blades, located on
the Documentation CD or the HP website
( http://www.hp.com/products/servers/proliant-bl/p-class/info )
• Maintenance and service guides for c-Class server blades, located on
the Documentation CD or the HP website
(
http://www.hp.com/go/bladesystem/documentation )
9 "General diagnosis flowchart (on page 98 )"