HP ProLiant BL680c G7 Server-Blade - Manual (Page 40)

Hardware options installation 40
14. Remove the heatsink protective cover.
CAUTION: Orient the heatsink as indicated in the procedure. Otherwise, you cannot install the
hard drive cage.
CAUTION: When tightening the heatsink screws, first tighten the front screw four to five turns,
tighten the back screw completely, and then finish tightening the front screw.
15. Orient and install the heatsink as shown in the illustration.
16. Install the front panel/hard drive cage assembly (A-side).
17. Install the access panel (A-side).
18. Install the hard drives (" Hot-plug SAS or SATA hard drive option " on page 59 ).
19. Install the server blade (" Installing a server blade " on page 32 ).
20. Power up the server blade (on page 16 ).