HP ProLiant BL680c G7 Server-Blade - Manual (Page 64)

Hardware options installation 64
6. Remove the mezzanine connector cover.
7. Align the mezzanine connector on the optional mezzanine card with the mezzanine connector on the
interposer board.
CAUTION: To prevent damage to the server blade, apply pressure over the mezzanine
connector when installing the mezzanine card. Do not apply pressure to the edges of the card.
8. Install the mezzanine card. Press down on the connector to seat the card.
9. Install the interposer board.
10. Install the access panel (B-side).
11. Install the server blade (" Installing a server blade " on page 32 ).
12. Power up the server blade (on page 16 ).