HP ProLiant BL680c G7 Server-Blade - Manual (Page 23)

Operations 23
7. Remove the front panel/hard drive cage assembly.
Remove the interposer board
To remove the component:
1. Power down the server blade (on page 16 ).
2. Remove the server blade (on page 17 ).
3. Place the server blade on a flat, level surface with the B-side of the server blade facing up. To determine
which side is the B-side, see the label attached to the access panel.
4. Remove the access panel (B-side) (on page 18 ).
5. Loosen the thumbscrews.