HP Integrity Superdome 2 Server - Manual (Page 49)

•
Access level/Bay level:
All ◦
◦ Bay specific
•
Restrictions:
Dependent on bay privileges
•
Example:
OA-0016355E560A> SHOW DEVICE SERIAL_NUMBER BLADE
Serial number: USM81500RP
SHOW INTERCONNECT SESSIONS
•
Command:
SHOW INTERCONNECT SESSIONS
•
Description:
Displays which users have serial console sessions in progress for each interconnect
•
Access level/Bay level:
OA Administrator, OA Operator ◦
◦ Bay specific
•
Restrictions:
You must have access to the specified bay.
•
Example:
OA-0018FE27577F> SHOW INTERCONNECT SESSION
Interconnect Bay User
------------------ --------------
No Interconnect remote console sessions were detected.
SHOW USER SESSIONS
IMPORTANT: On Superdome 2 systems, the following long-running commands are not immediately
subject to the session timeout defined by the SET SESSION TIMEOUT command:
•
SHOW {HR | FPL | LIVELOGS | SEL | SYSLOG | PARTITION CONSOLELOG}
•
CONNECT {BLADE | INTERCONNECT | PARTITION }
•
CO
•
FPL
•
SEL
If a user has one of these commands active, their session will not be removed when a session
timeout occurs; instead it will be removed once they exit the long-running command and interact
with the CLI. The SHOW USER SESSIONS command will not display the active session after a
session timeout occurs.
•
Command:
SHOW USER SESSIONS
•
Description:
Displays a list of authenticated sessions on the OA, including CLI and WebGUI sessions.
SHOW INTERCONNECT SESSIONS 49