HP Integrity Superdome 2 Server - Manual (Page 67)

◦ The default read community name is public.
◦ The default write community name is public.
SET SNMP CONTACT
•
Command:
SET SNMP CONTACT "<contact>"
•
Description:
Configures the name of the system contact. The default contact is blank.
•
Access level/Bay level:
OA Administrator, OA Operator
•
Restrictions:
The <contact> must be no more than 20 characters long. Valid characters are all
alphanumeric, the underscore (_), the dash (-), and spaces.
SET SNMP LOCATION
•
Command:
SET SNMP LOCATION "<location>"
•
Description:
Configures the SNMP location of the enclosure. The default location is blank.
•
Access level/Bay level:
OA Administrator, OA Operator
•
Restrictions:
The <location> must be no more than 20 characters long. Valid characters are all
alphanumeric, the underscore (_), the dash (-), and spaces.
SHOW NETWORK
•
Command:
SHOW NETWORK
•
Description:
Displays:
◦ DHCP state
◦ Dynamic DNS state
◦ IP address subnet mask
◦ Gateway address
◦ Primary and secondary DNS addresses
◦ MAC address
◦ HTTP and HTTPS server status
◦ SNMP status
SET SNMP CONTACT 67