HP Systems Insight Manager - Manual (Page 95)

•
The host is still in the same domain.
•
All credentials are known.
•
The new host name can be resolved by the DNS server.
•
The new IP address is valid (assigned through DHCP if enabled on the CMS) and is the IP
address assigned to the CMS.
•
If the SQL database is a local database running on the CMS server, reconfigure the CMS
database information using the sqlredirect command.
Warning
Verify that all HP SIM or HP Insight Control operations are complete before running this command.
Reconfiguring the CMS host name and primary IP address
To reconfigure the CMS host name and primary IP address, complete the following:
Procedure 20 Reconfiguring the CMS host name and primary IP address
1. Open a command prompt on the CMS and navigate to the install directory of HP SIM.
2. Type the following, and then press Enter:
mxreconfig -m host
3. Follow the prompts that appear to complete the host name and IP address change.
Reconfiguring the CMS database credentials
The mxreconfig —m dbauth —a <dbuserDomain\dbuser> command enables you to
change the credentials used by Insight Management to access the CMS database. If the user name
used to logon to the database associated with Insight Management software must be changed,
then this command must be used.
Dependencies
•
CMS is installed and configured on a Windows operating system host, using Microsoft SQL.
•
All credentials are known.
•
The database credentials provided by the user during this command are valid for the CMS
database.
Warning
Verify that all Insight Management software operations are complete before running this command.
Changing the HP SIM and HP Insight Control database credentials
Additional steps are required to change the database authorizations for Matrix OE and Operations
Orchestration:
Procedure 21 Changing the HP SIM and HP Insight Control database credentials
1. Open a command prompt on the CMS and navigate to the install directory of HP SIM.
2. Type the following, and then press Enter.
mxreconfig -m dbauth -a <db-user-name>
3. Enter the new password when prompted, and then press Enter.
Changing the database authorizations for Matrix OE and HP Operations Orchestration
Additional steps are required to change the CMS password for Matrix OE and Operations
Orchestration:
Reconfiguring the CMS database credentials 95