HP XP P9500 Storage - Manual (Page 104)

This dialog box lets you link two storage systems for creating Continuous Access Synchronous
pairs. See
“Configure storage systems, define logical paths” (page 41) for complete information.
Description Item
Remote system’s CU serial number. RCU S/N
Remote system’s LDKC number. LDKC
Remote system’s controller ID. Controller ID
Remote system’s CU number. Logical Adr. (RCU CU)
Remote system’s SSID. SSID
Remote system’s Path group ID. Path Gr. ID
To enter the path group ID, clear the Default check box, and input the value in hexadecimal
within the range of 1 to FF. To use the default ID, click the Default check box.
Path from the ports on the local and remote systems. MCU-RCU Path
RCU Option dialog box
104 Continuous Access Synchronous GUI reference