HP DesignJet 500 - Manual (Page 160)

Media & Ink Introduction Front-Panel Other Index Solutions
The Front-Panel Setup Menus Consumable Menus Internal Prints Navigation
Message
Descriptions
Printer
Options
OK The ink system is working
correctly None
Preventative
maintenance advised The printer has kept track of
the number of cycles your
printer has performed. This
message means the printer
needs maintenance to
maintain its performance
and to prevent printer down-
time in the future. Contact your local HP
representative. Arrange a
time, which would be
convenient for you and he will
service the printer see
Service
Preventative Maintenance
Printer temperature is
out of the printer's
operating range. Printer
cannot function. Under cold environmental
conditions outside its
operating range the printer
will stop. It does this to
protect the ink systems
inside the printer. Simply ensure the
temperature is above 15
°
C
and turn the printer off and on
again.
Printing Low memory The printer previously
compressed a print file
while it was receiving and it
is now expanding the file. Printing will continue after
expanding the data but it will
be slower than usual.
Processing The printer has received a
print file and is processing
the information before
commencing printing.
Status Description Procedure