HP DesignJet 500 - Manual (Page 161)

Media & Ink Introduction Front-Panel Other Index Solutions
The Front-Panel Setup Menus Consumable Menus Internal Prints Navigation
Message
Descriptions
Printer
Options
Receiving The printer is receiving a
file. If you have problems printing,
see the
Solutions tab.
Receiving Low memory While receiving a print file,
the printer’s memory has
become low. The printer will compress the
file while it continues to
receive the data.
Recover There is a problem with one
of the printheads you are
using. To see exactly what
printhead has the problem
go to the printhead menu
and press Enter key. See Printhead Recovery
Procedure for an animation on
how to perform this procedure.
Remove ink cartridge by
pushing it in and up This is an ink cartridge
removal instruction. For more an animation
showing the Cartridge removal
procedure see
Ink Cartridge
Removal
Remove media weight
Wind excess media
using TUR button
Press ENTER You are unloading media
from the printer, you must
first remove the media
weight from the Take Up
Reel before you can
complete the procedure. If you do not want to use the
Take Reel, you can turn Off
the setting by going to Utilities/
TUR installed/No
Replace The printer is informing you
that there is a printhead that
needs replacement. See Printhead Status
Messages
Status Description Procedure