HP Insight Control - Manual (Page 49)

Memory Inventory
•
System Memory
Displays the physical memory installed in the server ◦
◦ Displays the amount of memory that can be addressed by the operating system
◦ Displays any server-specific memory technology or configurations
•
Memory Board—Describes the configuration of the memory boards and lists the number of
DIMMs configured in each particular DIMM socket and any empty sockets
•
Memory Configuration recommendations- Displays server specific memory recommendations
(for G7 servers and above), if any
Network connections
The following information is provided for network connections.
Network Connections Status
•
Network MBytes/Sec—The average number of megabytes transferred (transmitted or received)
over the network subsystem each second
•
MBits TX/Sec—The average number of megabits transmitted over the network each second
•
MBits RX/Sec—The average number of megabits received over the network each second
Network connection performance is determined by the performance of the network adapters.
Network Connection Inventory
•
Network Connections Configuration—Displays the number of adapters and ports installed
and available on the server, including any that are disabled
•
IP Addresses—Displays all IP addresses assigned to the ports
•
Displays the NIC teaming information and the NIC adapters involved in teaming of a monitored
server
Network adapter
The following information is provided for a network adapter.
Network Adapter Status
•
MBits TX/Sec—The average number of megabits transmitted from the selected adapter each
second
•
MBits RX/Sec—The average number of megabits received by the selected adapter each
second
•
MBytes/Sec—The average number of megabytes transferred (transmitted or received) over
the network adapter each second
NIC port performance on the adapter determines network adapter performance.
Network connections 49