Figure 68 – HP Surestore Disk Array 12h and FC60 User Manual
Page 189

Attaching SCSI Cables and Configuring the Disk Enclosure Switches 189
Inst
alla
tion
Figure 68
Full Bus BCC Configuration Switch Settings
Segment 1 set to “1”
Segment 1 set to “1”
Segment 1 set to “1”
Segment 1 set to “1”
Note inverted orientation from upper BCC
Note inverted orientation from upper BCC
Note inverted orientation from upper BCC
Note inverted orientation from upper BCC
Segment 1 set to “1”
Segment 1 set to “1”
Segment 1 set to “1”
Segment 1 set to “1”
All other segments set to “0”
All other segments set to “0”
All other segments set to “0”
All other segments set to “0”
Tray ID set to unique value
Tray ID set to unique value
Tray ID set to unique value
Tray ID set to unique value
for each enclosure
for each enclosure
for each enclosure
for each enclosure
Tray ID set to same value
Tray ID set to same value
Tray ID set to same value
Tray ID set to same value
on both BCCs in the enclosure
on both BCCs in the enclosure
on both BCCs in the enclosure
on both BCCs in the enclosure