Management processor, Integrated lights-out (ilo) nic, Integrated lights out – HP Insight Management Agents User Manual
Page 29: Alarm
Agent information 29
Management Processor
Integrated Lights-Out (iLO) NIC
The NIC section displays the following information about the NIC in the iLO. Not all fields are supported by all
models of Remote Insight Board and/or NIC.
•
Model—Displays the NIC model.
•
DNS Name—Displays the fully qualified DNS name assigned to this iLO.
•
Type—Displays if the NIC is embedded or pcmcia and whether it is Ethernet or a token ring.
•
IP Address—Displays the IP address for this NIC.
•
Subnet Mask displays the subnet mask for this NIC.
•
Gateway—Displays the default gateway configured for this NIC.
•
Status—Displays if this NIC is enabled or disabled.
•
Physical Address—Displays the MAC address for this NIC.
•
Duplex—Displays if the controller is in half duplex, full duplex or does not support a duplex state.
•
Link Status—Displays Remote Insight/Integrated Lights-Out Network Interface Controller condition. The following
values are possible:
•
Other
•
Ok
•
Degraded
•
Failed
•
Speed—Displays the speed of the NIC.
•
Max Packet Size—Displays the maximum packet size of the NIC.
•
Transmit/Receive Statistics—Displays the following set of statistics for the NIC:
•
Bytes—Displays the number of bytes transmitted/received.
•
Total Packets—Displays the number of packets transmitted/received.
•
Unicast Packets—Displays the number of unicast packets transmitted/received.
•
Non-Unicast Packets—Displays the number of non-unicast packets transmitted/received.
•
Discarded Packets—Displays the number of packets discarded during transmit/receive.
•
Error Packets—Displays the number of error packets found during transmit/receive.
•
Unknown Protocols—Displays the number of unknown protocol packets received.
•
Queue Length—Displays the number of outstanding packets in the transmit queue.
Integrated Lights Out
•
Model—Displays the edition of the iLO in the server.
•
Hardware Version—Displays the Hardware revision of iLO model on the server.
•
Serial Number—Displays the iLO serial number.
•
Firmware Version—Displays the iLO firmware version and date.
•
Active License Type—Displays the activated iLO license type.
•
License Key—Displays the activated iLO license key.
•
iLO Security Override Switch—Displays the Integrated Lights-Out security state. The iLO Security Override
Switch field is supported only in case of Integrated Lights-Out models.
•
Mouse—Displays whether the mouse is connected to Remote Insight Board. The Mouse field is not supported for
Remote Insight Lights-Out models.
•
Keyboard—Displays whether the keyboard is connected to Remote Insight Board. The Keyboard field is not
displayed for Remote Insight Lights-Out models.
•
Interface Status—Displays the iLO interface status.
Alarm
If your system supports Remote Insight Lights-Out Edition, the following alerts are available:
•
Status—Indicates if alerts are enabled at the iLO. This is a global flag and governs all users. If alerts are
disabled, alarms are not sent.