External expansion cabinet – HP Insight Management Agents User Manual
Page 87
CR3500 RAID Array SCSI controller 87
•
Critical—The controller temperature sensor has detected a critical temperature condition in the primary
enclosure.
•
Non-critical—The controller temperature sensor has detected an abnormal temperature condition in the
primary enclosure.
•
Unknown—The enclosure temperature information is unavailable.
•
Primary enclosure temperature—Displays the current primary enclosure temperature in degrees Celsius.
•
Primary enclosure fan status—Displays the current primary enclosure fan status. The following conditions are
valid:
•
OK—The fan status is normal.
•
Critical—The fan has failed.
•
Unknown—The enclosure fan status information is unavailable.
•
Primary power supply status—Displays the current primary power supply status. The following conditions are
valid:
•
OK—The power supply status is normal.
•
Critical—The power supply is installed and marked as failed.
•
Not Installed—One of the redundant power supplies has been removed.
•
Unknown—The power supply status information is unavailable.
External Expansion Cabinet
This section displays the External Expansion Cabinet information. The following conditions are valid:
•
Power Supply Status—Displays the current status. The following conditions are valid:
•
OK—All power supply parameters are normal.
•
Non-Critical—The redundant power supply is reporting a fault that is not critical to operation.
•
Not Installed—One of the redundant power supplies has been removed.
•
Unknown—The power supply information is unavailable.
•
Fan Status displays the current fan status. The following conditions are valid:
•
OK—All fans are operating normally.
•
Critical—A fan has failed.
•
Non-Critical—A fan is in a degraded condition.
•
Not Installed—The fan has been removed.
•
Unknown—The fan status information unavailable.
•
Temperature Status—Displays the current temperature status. The following conditions are valid:
•
OK—All temperature sensors are reporting normal.
•
Critical—Temperatures have reached the critical level, and failure might be imminent.
•
Non-Critical—The temperature is outside of the normal range, but has not reached the critical level.
•
Not Installed—The temperature sensors cannot be read.
•
Unknown—The temperature status information is unavailable.