HP Insight Management Agents - Manual (Page 75)

Agent information 75
• Enclosure Model
• Asset Tag
• Part Number
• Spare Pat Number
• Serial Number
• Firmware Revision
• Previous Enclosure Name
• Next Enclosure Name
• Height \ Width \ Depth
• Unit Identification LED
• Previous Enclosure Serial Number
• Next Enclosure Serial Number
• Address
• Maximum Blade Number
• Enclosure Blade Information
• Name
• Part Number
• Spare Part Number
• Position (Slot Number)
• Height \ Width \ Depth
• Number of Bays Occupied
• Enclosure Fuses
• Condition
• Fuse
• Location
• Present
• Enclosure Network Connector
• Name
• Model
• Serial Number
• Part Number
• Spare Part Number
• Firmware Revision
• Type
• Location
• Present
NOTE: The iLO driver and the Rack Management Dispatch Service must be installed for the Rack
Information sub-agent to communicate with the rack infrastructure.
Following information is listed on the C-Class Enclosure Information Screen:
• Onboard Administrator Link—The web link to the enclosure managers web based management information for
the enclosure
• Onboard Administrator IP Address—The IP address of the rack enclosure manager
• Enclosure Serial Number—The serial number of the enclosure
• Enclosure Product ID—The enclosure product identifier. The string will be empty if it could not be determined
• Enclosure FirmWare Revision—The Firmware revision of the Enclosure Manager/Onboard Administrator. The
string will be empty if it could not be determined.
Information availability to a WMI consumer
For Windows 2000, the formatted OS performance data is available by registering a Windows WMI provider that
supplies the formatted final OS performance data. The data is populated in WMI under the specific classes as
follows: