HP Insight Management Agents - Manual (Page 57)

Agent information 57
• Unknown—The agent cannot determine the RAID level of this logical drive. You might need to upgrade your
software.
• Capacity—Displays the size of the logical drive.
• Stripe Size—Displays the size of a logical drive stripe in kilobytes.
• Disk Rebuilding—Identifies the physical drive that is being rebuilt. The identity of the physical drive only displays
when the status of the logical drive is Rebuilding, otherwise, N/A displays.
Physical drives
This is a list of physical drives that make up the logical drive. Select one of the listed physical drives to see more
information about the drive.
Spare drives
This is a list of physical drives that can be used to replace a failed physical drive if the fault tolerance mode is RAID 1
or RAID 0+1. Select one of the listed spare drives to see more information about the drive.
SCSI controllers
Select a SCSI controller entry from the Mass Storage list to display a submenu containing separate entries for
Controller Information, SCSI devices connected to the controller, and Storage System information. Device types
include disks, DVD/CD-ROM drives, tape drives, processors, tape libraries, CD libraries, scanners, optical drives,
WORM drives, and so on. The following items might be displayed depending on the type of controller:
• Controller information
• SCSI device information
• Tape library
• Tape devices
• CD storage system
• Storage Systems
• SCSI physical drives
• SCSI logical drives
• SCSI bus information
Controller information
Select a controller entry from the Mass Storage list to display the following information:
• Model—Displays the controller’s model ID, used for identification purposes. The following values are valid:
• Compaq 32-Bit Fast-SCSI-2 Controller
• Compaq Systempro/XL Integrated SCSI-2 Port
• Compaq Integrated Fast SCSI-2/P Controller
• Compaq 32-Bit Fast-Wide SCSI-2/E Controller
• Compaq 32-Bit Fast-Wide SCSI-2/P Controller
• Compaq Wide-Ultra SCSI Controller
• Compaq Wide-Ultra2 SCSI Controller
• Compaq 64-Bit Dual Channel Wide-Ultra2 SCSI Controller
• Compaq Wide Ultra3 SCSI Adapter
• HP 64-Bit/133MHz PCI-X 2CH Ultra320 HBA
• The StorageWorks Library Adapter
• Third-party SCSI Controller Model
• Unknown—The driver software or storage agents might need to be upgraded, or you have a SCSI
controller in the system that the Storage Agents do not recognize.
• Status—Displays the current status of the controller. The following values are valid:
• OK—The controller is operating normally.
• Failed—The controller has failed and is no longer operating.
• Unknown—You might need to upgrade your driver software or Storage Agents or the Storage Agents
cannot determine the status of the controller.
• Serial Number—Displays the serial number of the SCSI controller. This number can be used for identification
purposes.