HP XP P9500 Storage - Manual (Page 78)

Notes on performing monitoring
•
You can collect the monitoring data even while performing the relocation.
•
After stopping the monitoring, the tier range is automatically calculated.
•
The latest available monitoring information, which is collected just before the relocation is
performed, is used for the relocation processing.
•
When the relocation is performed, the status of the monitor information must be valid.
Viewing monitor and tier relocation information:
Information is displayed on the following items in the GUI windows:
•
Monitoring Status on “Pools window after selecting pool (Pools window)” (page 242) , “Top
window when selecting a pool under Pools” (page 247) , and “View Pool Management Status
window” (page 293) .
Displays the status of pool monitoring.
◦ In Progress: The monitoring is being performed.
◦ During Computation: The calculating is being processed.
Other than these cases, a hyphen (-) is displayed.
•
Recent Monitor Data on “Pools window after selecting pool (Pools window)” (page 242) and
“Top window when selecting a pool under Pools” (page 247)
Displays the latest monitoring data.
◦ If the monitoring data exists, the monitoring period of time is displayed.
Example: 2010/11/15 00:00 - 2010/11/15 23:59
◦ If the monitoring data is being obtained, only the starting time is displayed.
Example: 2010/11/15 00:00 -
◦ If the latest monitoring data does not exist, a hyphen (-) is displayed.
•
Pool Management Task on “Pools window after selecting pool (Pools window)” (page 242)
and “Top window when selecting a pool under Pools” (page 247)
Displays the pool management task being performed to the pool.
◦ Waiting for Relocation: The tier relocation process is being waited.
◦ Relocating: The tier relocation process is being performed.
78 Configuring thin provisioning