GE ZDP364NDPSS - Manual (Page 4)

4
Design Information
PRODUCT DIMENSIONS AND CLEARANCES
48” Range Models
Toekick/
leg Height
3-1/4”
to 4-3/4”
1”
35-1/4”
to
36-3/4”
Height
47-7/8”
Width
28-1/4”
48”
8”
14”
2”
16”
Gas/
Electric
Electric 6-1/2”
2”
Universal Utility Locations
Depth
to Front
of Door
Countertop
to Cooking
Surface
13”
Max.
12”
Minimum
Each Side
48” Min.
12” Minimum
to Adjacent Wall
Non-
Combustible
Material
48” Minimum
to Combustibles
18”
Min.
ADDITIONAL CLEARANCES:
Allow 12” minimum clearance to an adjacent wall
on each side.
Working areas adjacent to the rangetop should have
18” minimum clearance between countertop and
the bottom of the wall cabinet.
For island installation, maintain 2-1/2 in. minimum from
cutout to back edge of countertop and 3 in. minimum
from cutout to side edges of countertop (see top view).
Back
3” Min.
Island
Cutout
Top View
3” Min.
2-1/2” Min.
WARNING:
Installations without a hood require
48” minimum to combustibles.
A custom hood installation with
exposed horizontal combustible
surfaces must have an Auto-On
feature. Refer to hood installation
instructions for specific hood
clearances.
The surface of the entire back wall
above the range and below the
hood must be covered with a non-
combustible material such as metal,
ceramic tile, brick, marble or other
stone.