GE 45613 GE Z-Wave 3-Way Dimmer Kit with Terminals - Manual (Page 3)

This device is intended for installation in accordance
with the National Electric Code and local regulations
in the United States, or the Canadian Electrical Code
and local regulations in Canada. If you are unsure or
uncomfortable about performing this installation
consult a qualified electrician.
CAUTION
This switch is designed for use only with permanently
installed incandescent fixtures. Do not use it to
control fluorescent lighting, transformer supplied
lighting/appliances or receptacles. The incandescent
lighting controlled by this dimmer switch must not
exceed 600 watts.
NOT FOR USE WITH MEDICAL OR LIFE SUPPORT EQUIPMENT
There are no user serviceable parts in this unit.
Z-Wave enabled devices should never be used to
supply power to or control the On/Off status of
medical and/or life support equipment!
Dimmer switch
LED light
Air gap switch