GE 45605 GE Z-Wave Duplex Receptacle User Manual
Page 15
ADVANCED OPERATION
The following Advanced Operation parameters require that you
have an advanced controller like the GE model 45601 Advanced
remote. Advanced remotes from other manufacturers may also
be able to change these settings; however, basic remotes do not
have this capability.
All-ON and All-OFF
Depending upon your primary controller, the 45605 receptacle can
be set to respond to ALL-ON and ALL-OFF commands in up to four
different ways. Some controllers may not be able to change the
response from its default setting. Please refer to your controller’s
instructions for information on whether or not it supports the
configuration function and if so, how to change this setting.
The four possible responses are:
- It will respond to ALL-ON and the ALL-OFF command (default).
- It will not respond to ALL-ON or ALL-OFF commands.
- It will respond to the ALL-OFF command but will not respond to
the ALL-ON command.
- It will respond to the ALL-ON command but will not respond to
the ALL-OFF command.