GE 45605 GE Z-Wave Duplex Receptacle User Manual
Page 19
Important Note: To comply with the FCC RF exposure compliance
requirements, no change to the antenna or the device is
permitted. Any change to the antenna or the device could result
in the device exceeding the RF exposure requirements and void
user’s authority to operate the device.
Compliance with IC Rules and Regulations
IC: 6924A-45605
Jasco Products Company
Model: 45605
ZW1001
This Class B digital device complies with Canadian ICES-003.
SPECIFICATIONS
Power 120VAC, 60Hz
Signal (Frequency) 908.42 MHz
Maximum load for both outlets; 1800W Resistive
Maximum Load for the Z-Wave controlled outlet: 600W
Incandescent, ½ HP Motor or 1800W (15A) Resistive
Range: Up to 100 feet line of sight between the Wireless Controller
and the closest Z-Wave receiver module.
Operating Temperature Range: 32-104° F (0-40° C)
For indoor use only.
Specifications subject to change without notice due to continuing
product improvement
Z-Wave is a registered US trademark of Zensys A/S
© 2009 JASCO Products Company