Ag Leader Compass Manual - Manual (Page 67)

59
S
ETUP
V
IRTUAL
T
ERMI
NAL
Auxiliary
Assign implement functions to ISO compatible inputs.
Clear Virtual Terminal
Allows operator to clear the Object Pools sent to the
display from the implement WSM. After the object pools
have been cleared, the next time the implement is
connected the object pools will be transferred from the
implements WSM to the display again. When this button
is pressed, a warning dialogue box appears with the
following message:
“Are you sure you want to clear the saved interface files
from all virtual terminal devices Each device will resend
its interface the next time it is connected.”
A
UXILIARY
A
SSIGNMENT
Press: Virtual Terminal (VT) button > Setup (wrench) button > Auxiliary Assignments button
Assign implement functions to ISO compatible
inputs.
The number of functions and inputs shown on the
Auxiliary Mappings screens will vary depending on
the implement and input devices connected to the
display.
Note: Implement functions can not be mapped to Ag Leader switches.
Auxiliary
Assignment
Virtual Terminal Settings
Clear
Virtual Terminal
Auxiliary
Assignment
Auxiliary Mappings
Function Input