Ag Leader Versa DirectCommand Sprayer Quick Reference Guides - Manual (Page 2)

PN ?????? Rev A
PN 2006313 Rev A 2
2
DirectCommand
TM
Sprayer
Quick Reference Guide
AL: 2006310 - ENG Rev B
PWM Frequency
frequency valve is pulsed at, settings are from valve
manufacturer, typical settings = 100-125 Hz
PWM Gain
decrease to slow response time
PWM Standby
duty cycle when booms are all off, setting must be
greater than Zero Flow Offset, current PWM Duty
Cycle can be viewed on Liquid Diagnostics screen
while spraying
Zero Flow Offset
duty cycle used to start rotating the pump, if setting is
too high pump will not turn off, default = 30%
Valve Response 1
fast speed of the valve, decrease to slow response
time, default = 100%
Valve Response 2
slow speed of the valve, decrease to slow response
time, default = 24%
Response Threshhold
point where system switches between using Valve
Response 1 and Valve Response 2, increase to slow
response time, default = 3 units/min
Allowable Error
error allowed before making rate control adjustments
Inline Servo / Bypass Servo /
Pump Servo / Calibrated Reflow /
Ramsey Valve
PWM 12 volt / PWM ground
Control Valve Settings
Valve
Response 1
100
Response Threshold
Inline Servo Control Valve
Valve
Response 2
Allowable
Error
24 2 %
3
Control Valve Settings
Allowable
Error 100 PWM Frequency
PWM 12 volt Control Valve
800
50
30
PWM Gain
PWM Standby
Zero Flow Offset
2 %