Ag Leader Versa DirectCommand ISOBUS Quick Reference Guides - Manual (Page 4)

4
VT Quick Reference Guide
Quick Reference Guide
AL: 2006300 - ENG Rev C
When an alarm is activated on the VT, the display will
indicate the alarm by flashing “Virtual Terminal Alarm” in
the status bar.
Alarms are acknowledged and cleared by
pressing the green check mark button.
IMPORTANT: This button is only present when
a virtual terminal alarm has been activated.
Virtual Terminal Alarm
Configuration
Operator:
Start Field Operation:
Virtual Terminal Alarm
11:37:10 AM
03/11/2011
Virtual Terminal Alarm
Low fan speed detected
Disable Main
Drive Shutoff