Ag Leader GPS 1000 Plus Operators Manual - Manual (Page 11)

GPS 1000 Plus Installing Antenna/Receiver
Ag Leader Technology
9 December 2003 3000021
Other Cable
Connections
Refer to Figures 6 through 8 for some of the possible configurations to
attach the GPS 1000 Plus.
If you are not using an Ag Leader product refer to that product's Operator's
Manual to see how you verify GPS differential.
Step Action
Cable Attachment
1 Connect the GPS 1000 Plus cable to the GPS 1000 Plus receiver.
2 Attach Auxiliary Power Data cable to the GPS 1000 Plus cable
3 Connect the GPS Power Supply to the male connector of the
pigtail on the Auxiliary Power Cable.
4 Connect the remaining single 9-pin connector from the Auxiliary
Power Data Cable to an open COM Port on the PC.
Figure 6. Antenna to PC cable connection
Figure 7. Cable attachment for Handheld GPS device
Mobile Logging Cable
Hand Held Device
PC
Comm
Port
Auxiliary Power
Data Cable
GPS Power Supply
GPS 1000 Plus
Cable