Ag Leader GPS 5100 User Guide - Manual (Page 27)

GPS 5100 Receiver User Guide 2 1
Installing the Receiver 3
3.4
Connecting to an External Device
After installing the receiver and connecting the appropriate cabling,
you can connect the receiver to various external devices. For example:
To convert the GPS 5100 receiver to a Trimble 12-pin conxall cable,
use the adapter cable (Trimble P/N 50581).
Note – Do not bend the cable at the Deutsch connector. When you
secure the cable, use the supplied P-Clip. The P-Clip provides
additional support to the connectors and reduces the risk of damage.
To connect the GPS 5100
receiver to ... use the cable ...
an Autopilot system Trimble P/N 50165
(this cable has no DB9 connector)
a Field computer Cable included
a Yield monitor Cable included
a Trimble SiteNet™ radio, for RTK
positioning Trimble P/N 49801
Plug the ... into ...
Deutsch 12-pin connector Port A on the back of the receiver
straight DB9-pin connector the external device
power connectors a power supply