Ag Leader EZ-Guide Plus Cable – Keypad, Radar, Switch Installation - Manual

Ag Leader Technology Cable – Keypad, Radar, Switch
Ez-Guide Plus / 500 Installation Instructions
PN: 2005898 Rev A – June 2007 1
The Keypad Splitter Cable with Implement Switch (pn: 4001225-1) can be used for
multiple connections to the EZ-Guide Plus and EZ-Guide 500 Lightbars. This cable will
connect to the DB9 serial port on the back of the EZ-Guide plus or EZ-Guide 500.
Connections include:
• Keypad input
• Implement Switch input
• GPS signal output
• Radar speed output
Note: The Pulse Amplifier is only needed when connecting radar output to an external
device requiring radar speed. Only Raven, Hiniker and Dickey John monitors are
supported devices.