Ag Leader EZ-Guide 250 Quick Reference Guide - Manual (Page 4)

Curves
There are two types of curves: Identical and Adaptive.
With identical curves, guidance is based on the initial curve.
Any deviations are ignored. Set the A point, drive the curve,
and then set the B point.
With adaptive curves, guidance is always based on the
last pass.
When Auto U-turn detection is set to On, each new swath is
automatically generated when you turn. When Auto U-turn
detection is set to Off, set the B point at the end of each pass
to create the next swath.
Center-pivot
Set the A point, drive the pivot, and then set the B point.
For best results, follow the outermost wheeltrack of the
pivot arm.
Note - To work from the center of the field
outwards, the initial pivot must have a radius of at
least two swath widths and an arc length of at least
four swath widths.
FreeForm
Create curved and straight lines for guidance in fields of any
shape by recording the exact path you drive to generate the
next pass.
Ensure that you keep recording your path, to continue
receiving guidance. Guidance then snaps to the next path.
When more than one path is in the area, use the Next AB
icon to toggle between them.
A
B
Identical curves
Adaptive curves
B
A
A
B