Ag Leader EZ-Guide 250 Getting Started Guide - Manual (Page 41)

Drive and define the guidance line. 4.
Step 1: Enter the field and event names
The Confirm Configuration screen appears.
Select the Client option and then press . 1.
Do one of the following: 2.
Select an existing client from the list.
♦
Enter a new client name.
♦
Accept the default name.
♦
Repeat Step 2 for the Farm, Field, and Event options. 3.
Select Continue and then press . 4.
Step 2: Configure the implement
The Implement Width screen appears:
Press or to adjust the implement width and then press . The Overlap/Skip screen appears. 1.
Note : If you want to eliminate all skips in coverage, you can insert an overlap value to compensate for
GPS errors.
Do one of the following: 2.
If you want your passes to meet so you have full coverage without overlaps, use the default
Overlap/Skip value.
♦
If you want your passes to overlap, press to enter an overlap distance.
♦
37